Quickly set up your Linksys RE1000 Extender manually! Use a web browser to configure, select your Wi-Fi, and expand your network coverage. No more dead zones!
Ad
Linksys' RE1000 is a small wireless network extender. Here's how to configure it and, if necessary, reset it:
- Plug the Linksys RE1000 setup into a power outlet close to your router to turn it on. Await the power LED's illumination.
- Connect to the Extender Network. Choose "Linksys Extender Setup" as the default network on your device.
- Open a browser and navigate to extender.linksys.com to access Web Setup. This will direct you to the setup interface for the RE1000.
- Configuration and Login. If asked, provide your admin credentials. Enter the password for your primary Wi-Fi network after selecting it.
- Network Name Extender (Optional). For convenience, you can either change the extended network's name or leave it at its default.
- The best placement for the RE1000 is to move it to an area with inadequate coverage but a strong Wi-Fi signal from the router.
- Test connectivity by connecting your devices to the wider network and making sure the speed and range are constant.
- To reset the RE1000, press and hold the Reset button for ten seconds if setup doesn't work or adjustments are required. Factory settings will be restored by the extender.
WPS Quick Setup:
- As an alternative, press the router's and the RE1000's WPS buttons to pair them automatically.
The RE1000 will continue to provide dependable Wi-Fi performance if firmware is updated on a regular basis through the extender.linksys.com site.
If you have further queries about linksys extender reset, visit our website.
Email:
basnetanil1442@gmail.com
Comments
0 comment